English 
Views: 0 Author: Site Editor Publish Time: 2025-06-06 Origin: Site
Regularly cleaning the filter system of the ice bath machine can not only ensure the water quality is clean, but also effectively extend the life of the chiller. When it comes to the maintenance of the ice bath chiller filter system, the key part is the maintenance of the filter element. Next, I will introduce you to the frequency and method of cleaning the filter element.
First of all, the cleaning frequency of the filter element is not fixed, but dynamically planned according to the actual use. The generally recommended cleaning frequency is 1-2 times a week, and deep cleaning once a month. However, if the ice bath chiller is used every day or shared by multiple people, the cleaning frequency needs to be increased on this basis.
First, you need to disconnect the power supply. Before any cleaning, be sure to turn off the ice bath chiller and disconnect the power supply!
Next, find the filter cover and open it according to the instructions. The opening method varies depending on the product model. After opening the filter cover, remove the filter element and rinse the filter element thoroughly with tap water until the dust, hair and other impurities visible to the naked eye on the filter element are washed away. If necessary, you can use a soft brush or other tools to scrub, but avoid damaging the filter element material. Because the filter element is generally composed of a filter screen and filter paper (or glass), excessive force or a hard brush can easily damage the filter element.
After rinsing the filter element, check the filter element to see if there are any signs of tearing, discoloration or other damage. If there are obvious signs of damage, replace the filter element with a new one.
Finally, after the filter element is completely cleaned, make sure the filter element is completely clean and dry, reinstall the filter element and ensure that the filter element cover is properly installed. After checking that all parts are properly installed, reconnect the power supply and start the ice bath machine, check that all parts are operating normally, and then the cleaning is complete.
For deep cleaning, you can soak the filter element with a professional filter element cleaner on the basis of normal cleaning, and then use tap water to clean the filter element.
Maintaining your ice bath cooler's filtration system is essential to ensure clean water and extend the life of the unit.
Clean the filter 1-2 times a week, deep clean it once a month, and adjust the frequency of cleaning based on usage.
To clean, disconnect the power supply, remove and thoroughly rinse the filter, inspect for damage, and reinstall. For deep cleaning, use a professional cleaner.
