English 
Views: 0 Author: Site Editor Publish Time: 2025-07-17 Origin: Site
As the swimming season winds down and temperatures drop, many pool owners face the important task of preparing their pools and equipment for the off-season. One key piece of equipment that requires proper care during this period is your robotic pool cleaner. Proper storage of your robotic pool cleaner during the off-season not only preserves its functionality but also extends its lifespan and ensures optimal performance when the pool season returns.
Robotic pool cleaners are sophisticated machines with delicate electronics, motors, batteries, and filtration systems. Exposure to harsh winter conditions, prolonged moisture, and neglect can lead to:
Corrosion of metal components
Battery degradation
Damage to filters and seals
Motor and pump failure
Mold and mildew buildup
Proper off-season storage helps prevent these issues and ensures your robotic cleaner is ready to perform efficiently once the pool reopens.
Proper off-season storage of your robotic pool cleaner ensures long-term performance, battery longevity, and structural integrity. Below is a step-by-step guide to help you store your robotic pool cleaner the right way.
Before storing your device, it’s essential to remove all debris, contaminants, and chemical residues. This prevents corrosion, foul odors, and internal damage.
Empty and Rinse the Filter Basket or Cartridge:
Detach the debris basket or filter cartridge and empty out leaves, fine dirt, and other particles. Rinse thoroughly using a garden hose to ensure no residues remain.
Clean Brushes, Tracks, and Wheels:
Inspect the unit’s brushes, wheels, or tracks. Remove entangled hair, leaves, or string. Replace worn-out brushes or parts as needed to ensure the unit is ready for next season.
Rinse the Exterior:
Use fresh, non-chlorinated water to rinse the entire device, removing pool chemicals, algae, and mineral deposits. Pay special attention to joints and hard-to-reach areas.
A clean unit is less likely to experience deterioration and will be in better condition when the next pool season starts.
Most modern robotic pool cleaners are powered by lithium-ion batteries, which require proper care during long-term storage.
Charge the Battery to Full Before Storage:
A fully charged battery retains its health and prevents deep discharge, which can permanently reduce capacity.
Disconnect the Battery if Removable:
If your model allows for battery removal, detach it and store the battery separately in a cool, dry environment. This minimizes passive discharge.
Avoid Leaving the Cleaner Plugged In:
Continuous charging can lead to overcharging and battery swelling. Unplug the device once fully charged.
This step protects battery life and ensures the cleaner is operational once brought back into use.
Trapped water can lead to corrosion, internal component damage, and mold growth.
Remove All Water:
Tilt the cleaner or use compressed air to force out residual water from internal compartments, hoses, and pump systems.
Air Dry Thoroughly:
Allow the unit to dry completely in a shaded, well-ventilated area. Avoid direct sunlight, which can degrade plastics and electronics.
Make sure the cleaner is 100% dry before placing it in storage to avoid unpleasant surprises later.
Storage conditions are critical to protecting the robotic pool cleaner’s sensitive components.
Avoid Extreme Temperatures:
Do not store the unit in environments subject to freezing or overheating. Temperature swings can crack plastic parts or damage internal circuits.
Protect from UV Exposure:
Store away from direct sunlight, which can degrade casings, seals, and wires.
Keep Away from Pool Chemicals:
Chemicals such as chlorine or muriatic acid can corrode the robot’s components if stored nearby.
A garage, storage cabinet, or indoor utility room with stable temperatures and low humidity is ideal.
Keeping the cleaner elevated provides additional protection against moisture, pests, and physical damage.
Place on a Shelf or Table:
Avoid placing the unit directly on concrete or tile floors, which may absorb moisture. Elevation helps reduce the risk of rust and mildew.
Use a Protective Cover or Storage Bag:
Cover the robotic cleaner with a breathable dust cover or place it in a ventilated storage bag. This prevents dust accumulation and shields the unit from accidental knocks.
Following these steps ensures your robotic pool cleaner remains in excellent condition and is ready to deliver peak performance when the next pool season begins.
If your off-season storage extends over many months, periodically check your robotic pool cleaner to ensure it remains dry and dust-free. Occasionally recharge the battery if recommended by the manufacturer.
Before returning the cleaner to service, inspect all components carefully:
Check for cracks or damage to the housing
Inspect brushes and wheels for wear
Clean or replace filters
Test battery health and recharge fully
Run a brief cleaning cycle to ensure functionality
This inspection will help avoid surprises once the pool season begins again.
Shandong Addotron Robotics Technology Co., Ltd. offers a range of robotic pool cleaners engineered for durability and performance. Their products feature robust designs and smart systems that make off-season care easier. Addotron’s cleaners often come with removable filters, rechargeable batteries designed for long-term health, and easy maintenance protocols. Choosing a robotic pool cleaner from Addotron means you are investing in reliable technology supported by comprehensive customer service, including guidance on proper storage and maintenance.
Even with the best intentions, improper storage practices can shorten the lifespan of your robotic pool cleaner or lead to performance issues when you need it most. Here are some common mistakes to avoid:
Failing to dry your cleaner thoroughly before storage is a leading cause of internal corrosion and mold buildup. Moisture left inside the unit can also result in electrical shorts or damage to sensitive electronic components.
If your robotic pool cleaner uses a rechargeable battery, never store it completely discharged. A deeply depleted battery can lose capacity permanently, reducing runtime or rendering the cleaner inoperable next season.
In cold climates, storing your cleaner in an unheated space like a shed or garage may expose it to freezing temperatures. Any residual water inside can freeze, expand, and crack internal components or seals.
Proper off-season storage of your robotic pool cleaner is vital to maintaining its performance and longevity. By thoroughly cleaning the unit, fully charging and managing the battery, draining moisture, and storing it in a cool, dry, and protected environment, you safeguard your investment against damage and premature failure. Regular inspection during storage and careful preparation before the swimming season ensures your cleaner will be ready to deliver efficient, reliable pool cleaning when you need it most.
For the best robotic pool cleaning solutions and expert advice on maintenance and storage, consider exploring the advanced models offered by Shandong Addotron Robotics Technology Co., Ltd. Their innovative products are designed to meet diverse pool cleaning needs while simplifying upkeep and off-season care. Visit their website or contact Addotron’s knowledgeable team today to learn more and keep your pool cleaner performing at its best year-round.
