This bar serves to notify visitors of important updates

Contact-us


Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner

Smart Navigation Pool Cleaner

  • This cordless robotic pool cleaner is equipped with an upgraded intelligent smart navigation system, abandoning the traditional random cleaning mode.
  • It intelligently adapts to various pool shapes, slopes, curved walls and complex corner structures, effectively avoiding repeated cleaning, missing spots and dead zones.
  • With advanced obstacle recognition and anti-stuck technology, the cleaner can automatically detect and bypass pool ladders, greatly reducing stuck and floating failures.
  • It stably cleans the pool floor, vertical walls and stubborn waterline grime.
  • The true cordless design eliminates cable tangling and dragging risks.
  • Lightweight body, large-capacity filter basket and low-maintenance design, perfectly compatible with most in-ground and above-ground residential freshwater pools.
Inquire
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner
Smart Navigation Pool Cleaner

Brand

Addotron

Model No.

Hydro Apex Plus

Control

Remote control / App

Efficiency

12 m/min

Characteristics

  1. Precision Smart Navigation & Full Coverage

  2. Intelligent Anti-Stuck & Obstacle Avoidance

  3. Deep Waterline & All-Surface Cleaning

  4. 100% Cordless Hands-Free Operation

  5. Wide Compatibility & Low Maintenance

User Guide

  1. Before First Use

    Fully charge the robot with the original charger until the battery indicator shows full status.

    Check the filter basket is properly installed. Inspect scrub brushes for damage or tangled debris.

    Confirm all sealing parts are intact. Do not use the machine if any component is broken.

  2. Starting Cleaning

    Place the robot gently into pool water. Do not throw it.

    Press the unit under water briefly to release trapped internal air until it sinks to the pool bottom.

    Press the power button to activate. Thanks to smart‑navigation system, it will automatically calculate cleaning routes, clean pool floor, slopes, walls and waterline without manual control.

    Keep the robot running for its complete working cycle. Do not lift it out during operation.

  3. During Operation

    The robot may change direction frequently; this is normal smart‑route adjustment, not malfunction.

    If it gets stuck on ladders, drains or sharp corners: take it out, restart and place it at another position.

    Remove large‑size debris such as branches before cleaning to avoid blocking brushes or filter.

  4. Post‑Cleaning Steps

    Take the robot out of pool water after the cleaning cycle ends.

    Open the filter‑basket cover, empty all leaves, sand and dirt.

    Rinse filter basket, filter mesh and scrub brushes thoroughly with fresh clean water.

    Re‑install all parts correctly for next‑time use.

  5. Charging Instructions

    Only use the original dedicated charger.

    Make sure the charging port on robot is completely dry before charging.

    Charge indoors in cool, dry and shaded location. Never charge outdoors or in wet environment.

    Do not overcharge. Unplug charger once fully charged.

  6. Storage

    Do not store the robot submerged in pool water long‑term. Take it out after every use.

    Store in cool dry indoor place, avoid prolonged direct sunlight. Sunlight will damage plastic parts and shorten battery life.

    For long‑time idle: fully charge before storage, recharge every 2‑3 months to protect battery health.

Important Notes

  • Only for residential fresh‑water pools. Not for hot tubs, spas, salt‑water pools, commercial pools, ponds or fountains.

  • Working water temperature: 10℃‑35℃.

  • Keep hands, hair and loose clothing away from rotating brushes when powered on.

  • Remove robot from pool when adding chlorine, pH reagents or other pool chemicals. Do not run robot under high chemical concentration.

  • Do not disassemble main unit by yourself. Unauthorized disassembly voids warranty.

  • Stop operation immediately if abnormal noise, leakage or malfunction occurs. Contact after‑sales support, do not self‑repair.

  • Keep away from children while operating or charging; do not allow children to play with the unit.

Basic Specifications

Color

Greyish black / Black

Size

L526 x W450 x H260 mm

Weight

13.8 kg

Navigation

Navigation system

IMU + Ultrasound

Remote control

433 remote control, water depth 1.5m, controllable range 15m

Sensor

Gyroscope

6 axes

Ultrasonic testing

6 meters

Motor

Water-absorbing motor

Brushless motor, rotational speed: 3000 rpm

Walking motor

DC deceleration motor, rotational speed: 20 - 25/min

Battery

Battery power

9000 mAh

Working hours

3 h

Charging time

3.5 h

Storage

Temperature range

-20℃ ~ 60℃

Product lifespan

2 Y

Working temperature

4℃ ~ 35℃

1.

Advanced Smart Navigation System

Equipped with high‑precision sensor group and optimized route‑planning algorithm, this pool cleaner abandons traditional random wandering mode. It identifies pool structures in real‑time, arranges systematic cleaning paths, minimizes repeated routes and missing spots. Obstacle‑aware design helps avoid ladders, drains and corners, greatly lowering stuck probability for stable automatic cleaning.

2.

All‑round Surface & Deep Waterline Cleaning

Powerful rotating scrub brushes deliver reliable wall‑climbing performance. It thoroughly cleans pool floor, slopes, vertical walls and hard‑to‑reach waterline areas, stripping oil film, algae, limescale and accumulated grime. Works well on tile, concrete, fiberglass and vinyl liner pool surfaces.

3.

True Cordless Autonomous Operation

Built‑in rechargeable battery for full‑pool cleaning. No trailing power cords, no cable tangling or winding risks. One‑button start for hands‑off operation. No extra pump, hose or external power supply required. Simply drop it into the pool to start automatic cleaning.

4.

High‑Efficiency Filtration & Low‑Maintenance

Large‑capacity filter basket captures leaves, sand and fine particles. Quick‑release structure enables fast opening, dumping and rinsing. No complicated disassembly required for daily maintenance, saving your time on pool upkeep.

5.

Broad Pool Compatibility & User‑Friendly Design

Adapts to most residential in‑ground and above‑ground pools in rectangular, oval and irregular shapes. Lightweight body for easy lifting out from water. Simple workflow for new users without complicated learning curve.

Applicable Environment and Precautions

1.

Household fresh‑water in‑ground and above‑ground pools

2.

Pool shapes: rectangle, oval, irregular free‑form

3.

Surface material: tile, concrete, fiberglass, vinyl liner

4.

Working water temperature: 10℃ ~ 35℃

5.

❌ Not Applicable

‑ Commercial public swimming pools

‑ Hot tubs / spas

‑ Salt‑water pools, ponds, fountains

‑ Muddy turbid water or water with excessive chemicals

Application Scenario

3

Small Swimming Pool

3

Indoor Public Swimming Pool

3

Outdoor Large Swimming Pool

不规则泳池

Non-standard Swimming Pool

1.

What kinds of pools can this robotic cleaner work with?

It is designed for residential fresh‑water in‑ground and above‑ground pools. It fits rectangular, oval and irregular free‑form pools, compatible with tile, concrete, fiberglass and vinyl liner surfaces. Working water temperature is 10℃‑35℃. Not for commercial pools, hot tubs, spas, salt‑water pools, ponds or fountains.

2.

How does the smart navigation function work?

Equipped with built‑in sensors and route‑planning algorithm. Instead of random wandering, it calculates systematic cleaning paths, reduces repeated cleaning and blind spots. It can identify obstacles and adjust routes to lower stuck risks for full‑pool coverage.

3.

Can it clean walls and waterline areas?

Yes. Powerful rotating scrub brushes support stable wall‑climbing. It cleans floors, slopes, vertical walls and waterline, removing oil film, algae and limescale buildup.

4.

Is it truly cordless? Do I need extra pumps or hoses?

100% cordless, powered by built‑in rechargeable battery. No external pump, hose or power cable required. Just charge it, drop it into the pool and press the button to start auto‑cleaning.

5.

Why does the robot still get stuck occasionally even with smart navigation?

Anti‑stuck navigation greatly reduces jamming but cannot eliminate it completely. Pool ladders, main drains, sharp corners and large debris may cause stuck. Remove large obstacles in advance. If stuck, take it out, restart and place it at another position.

6.

How long is the runtime on a full charge?

Fully charged battery supports one complete full‑pool cleaning cycle for most household‑sized pools. Fully charge before first use to optimize battery lifespan.

7.

The robot makes strange noise during work, what should I do?

Take it out of water and check if hair, leaves or debris are tangled in brushes or filter. Clear obstructions and restart. If abnormal noise remains, stop using and contact after‑sales support. Do not disassemble the unit by yourself.

8.

What should I do for long‑term storage?

Clean all parts thoroughly. Store in cool dry place. Charge fully before storage; recharge every 2‑3 months to protect battery performance.