Smart Floor Navigation / Gyroscope Floor Mapping Cordless Pool Robot for Tile And Fiberglass Walls

1.

MONSTER SUCTION & NON-STOP POWER

Say goodbye to battery decay and half-cleaned pools! This corded robotic pool cleaner delivers continuous, relentless high suction power that cordless models can't match. It effortlessly traps heavy leaves, fine sand, stubborn algae, and backyard debris with zero power drop-off from start to finish.

2.

PLUG & PLAY FOR ALL POOL TYPES

Zero complicated setup required. Just drop it in, press the button, and let it work its magic. Perfect for both large in-ground and above-ground backyard pools, and 100% safe for all pool liner materials including Vinyl, Concrete, Fiberglass, tile, and Pebble.

3.

TANGLE-FREE SWIVEL CORD TECHNOLOGY

Frustrated with twisted cables? Our advanced anti-tangle mechanical swivel joint allows the heavy-duty power cord to rotate 360° freely. The pool robot moves seamlessly around your swimming pool without getting stuck or knotted, ensuring a completely autonomous, hassle-free operation.

4.

DUAL-DRIVE MOTOR & POWERFUL SUCTION

Equipped with dual-drive motors and a high-flow water pump capable of producing hundreds of gallons per minute, suction power typically exceeds 2000 GPH - 4000 GPH (gallons per hour).

1.

How to operate and use it?

Ready to use right out of the box; simply plug in the power, start with a single button press, and connect via the app or remote control—no further setup required. Please refer to the user manual for details.

2.

If a part needs to be replaced, how do I replace it?

We provide spare parts for wear-and-tear items, as well as instructional videos for replacement and installation.

3.

Why didn't the robot carry out the cleaning plan as instructed by the mobile phone?

The network environment needs to be checked to ensure that the network signal is stable.

4.

How should it be maintained if not used for an extended period?

1. Thoroughly remove any dirt and entangled debris from the robot.

2. Clean the filter thoroughly and let it dry.

3. Carefully inspect the battery casing for signs of damage or corrosion.

4. Ensure the robot is completely dry to prevent mold growth, and store it in a dry, well-ventilated area.