This bar serves to notify visitors of important updates

Contact-us


High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools

High Suction Cordless Pool Robot for Public Pools

  • This budget‑friendly cordless robotic pool cleaner delivers fully‑automatic pool maintenance without messy power cords, hoses or extra pump connections.
  • Built for above‑ground and small‑to‑medium in‑ground pools, the robot runs on rechargeable lithium‑ion battery for reliable runtime to complete full‑pool cleaning in one cycle.
  • Adopting optimized navigation logic, it travels across pool bottoms, bounces off walls and covers most pool areas efficiently.
  • The integrated scrubbing brushes work together with strong suction to lift stubborn sediments.
  • When cleaning finishes or battery runs low, the cleaner will drift toward pool wall for easy retrieval.
  • No complicated installation, no app learning curve, perfect for home pool owners looking for a cost‑effective way to cut down pool‑cleaning chores.
Inquire
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools
High Suction Cordless Pool Robot for Public Pools

Brand

Addotron

Model No.

Hydro Apex S

Control

Remote control / App

Efficiency

12 m/min

Characteristics

  1. True Cordless Freedom

  2. Powerful Suction & Scrubbing

  3. Smart Auto‑Return Design

  4. Easy‑to‑Maintain Filtration System

  5. Budget‑Saving Automatic Pool Care

User Guide

  1. Charge Fully First: Charge 4‑6 hours before first use. Ensure charging port is dry. Never charge in water.

  2. Prepare the Unit: Confirm filter basket is locked in place. Clear large debris from pool.

  3. Start Cleaning: Press power button, submerge robot into pool. It sinks to floor and auto‑cleans dirt, sand & leaves.

    Note: Floor‑only cleaning, no wall‑climbing.

  4. Retrieve Robot: After cycle ends or battery low, robot drifts to pool wall. Lift out by top handle.

  5. Post‑Use Care: Remove & rinse filter basket with hose. Store robot in cool dry place. Do not leave in pool long‑term.

Important Notes

⚠️ Use only original adapter

⚠️ Working water temp: 10‑35°C

⚠️ Not for spas / hot tubs

⚠️ Do not disassemble the unit

Basic Specifications

Color

Greyish black / Black

Size

L526 x W450 x H260 mm

Weight

13.8 kg

Navigation

Navigation system

IMU + Ultrasound

Remote control

433 remote control, water depth 1.5m, controllable range 15m

Sensor

Gyroscope

6 axes

Ultrasonic testing

6 meters

Motor

Water-absorbing motor

Brushless motor, rotational speed: 3000 rpm

Walking motor

DC deceleration motor, rotational speed: 20 - 25/min

Battery

Battery power

9000 mAh

Working hours

3 h

Charging time

3.5 h

Storage

Temperature range

-20℃ ~ 60℃

Product lifespan

2 Y

Working temperature

4℃ ~ 35℃

1.

True Cordless Freedom

No power cords, no hoses, no connection to pool pump. Rechargeable battery‑powered, free from cable tangling trouble. Just drop‑and‑go for hands‑free cleaning.

2.

Powerful Floor‑Cleaning Performance

Strong suction plus integrated scrub brushes, efficiently picks up leaves, fine sand, dust and settled sediments, keeps pool floor spotless. Fits above‑ground & small‑to‑medium in‑ground pools.

3.

Smart Auto‑Return Design

When cleaning finishes or battery runs low, the robotic cleaner automatically drifts to pool wall. Built‑in top handle enables easy lifting out from water, no need for fishing poles.

4.

Low‑Cost Easy Maintenance

Reusable filter basket captures various debris. Simply rinse with garden hose after use. No expensive replacement filter parts required, cuts your ongoing maintenance cost.

5.

Simple One‑Button Operation

Zero complex setup, no app or complicated programming required. Friendly for all pool owners, greatly reduces manual pool‑vacuum workload.

6.

Budget‑Friendly Value

Affordable alternative to high‑end robotic pool cleaners. Delivers core automatic cleaning functions at reasonable cost, ideal for budget‑conscious home users.

7.

Lightweight & Portable

Compact light‑weight body, convenient to carry, take out and store. Store in cool dry place after use, do not leave inside pool long‑term.

Applicable Environment and Precautions

1.

Above‑ground pools

2.

Small & medium in‑ground residential pools

3.

Fresh‑water swimming pools

4.

Not for hot tubs, spas

5.

 Not for commercial large‑size public pools

6.

Not for salt‑water pools (unless your model supports salt water)

7.

Water temperature: 10°C‑35°C

8.

Water depth: 0.5‑2.0m

9.

Avoid running under heavy thunderstorm or heavy rain

10.

Do not operate in water with excessive chemical concentration

11.

Do not leave the robotic cleaner submerged in pool for long‑term storage. Take it out after each cleaning cycle.

12.

After use, store in cool, dry and shaded place. Avoid long‑time direct sunlight exposure.

13.

Keep away from sharp pool edges and protruding objects to prevent jamming.

Application Scenario

3

Small Swimming Pool

3

Indoor Public Swimming Pool

3

Outdoor Large Swimming Pool

不规则泳池

Non-standard Swimming Pool

1.

Why doesn’t the robot climb pool walls?

This is budget cordless model, designed for floor‑only cleaning. It vacuums and scrubs the pool bottom only, not for wall or water‑line cleaning.

2.

Why is suction weak?

1. Filter basket is clogged; take it out and rinse thoroughly. 2. Debris tangled around scrub brushes, clear foreign objects. 3. Battery power is low, fully recharge the unit.

3.

Robot stops in the middle of cleaning

Check battery level. Heavy debris may block brushes or filter. Take out the robot, clean filter and brushes, recharge and restart.

4.

Why does it not return to the pool wall?

Excessive debris may affect navigation. Clean filter and brushes, ensure sufficient battery. If still not working, you can manually retrieve it by handle.

5.

Can I leave the robot in the pool all the time?

No. Please take it out after each cleaning. Long‑term soaking will shorten service life. Store in cool dry shaded area.

6.

What pools are not suitable?

Not for hot tubs, spas, commercial public pools. Not for salt‑water pools. Suitable for fresh‑water above‑ground & small‑medium in‑ground pools.

7.

Can I charge it in water?

Absolutely not. Take robot out of water and dry charging port before charging. Only use original adapter.

8.

Does it require pool pump or hose connection?

No. It is fully cordless, no external pump, no hose needed, drop‑and‑go operation.

9.

What water temperature and depth can it work in?

Working water temperature: 10‑35°C; Water depth: 0.5‑3.0m.

Related Products

This Cordless Wall Climbing Pool Robot is a fully wireless, all-in-one automatic pool cleaner. Equipped with upgraded wall-climbing traction technology, it steadily climbs vertical pool walls to wipe out stubborn waterline grime, algae and slimy stains ignored by ordinary cleaners. Adopting hose-free and cordless design, it requires no external pump or complicated setup for plug-and-play use. Built with intelligent cruise navigation and obstacle avoidance, it achieves full-coverage cleaning on pool floors, walls and waterlines without dead zones. IPX8 waterproof and rechargeable construction supports long-hour unattended underwater operation, delivering efficient hands-free maintenance for all residential and commercial pools.
Inquire
This Anti-dropping Cordless Wall Climbing Pool Robot is an upgraded smart pool cleaner optimized with anti-fall climbing technology. Adopting enhanced anti-slip traction structure, it stably climbs vertical pool walls without slipping or dropping, enabling safer waterline stain and algae cleaning. Fully cordless and hose-free, it eliminates messy cables and complicated installation for true plug-and-play use. Equipped with intelligent full-coverage navigation and precise obstacle avoidance, it thoroughly cleans pool floors, walls and waterlines with zero dead zones. IPX8 full waterproof and rechargeable design supports long-duration unattended underwater cleaning, delivering safer, more reliable pool maintenance for all residential and commercial pools.
Inquire
This Automatic Wall-climbing Pool Cleaner is a multi-functional underwater pool sweeper for full 3D pool cleaning. Designed with upgraded wall-climbing traction technology, it steadily climbs vertical pool walls and thoroughly cleans stubborn waterline grime, algae and residual stains. Working fully underwater, it delivers deep cleaning for pool floors, walls and corners without floating leakage. Cordless and hose-free with automatic cruising, it requires no manual operation or external equipment. Featuring smart obstacle avoidance and IPX8 full waterproof design, it provides efficient, hands-free underwater sweeping for all residential and commercial pools.
Inquire
This Long Battery Life Cordless Pool Robot is an upgraded wireless pool vacuum focused on durable runtime and powerful cleaning performance. Equipped with a high-capacity built-in battery, it supports ultra-long continuous cleaning for medium and large pools. Featuring enhanced strong suction technology, it effortlessly picks up fine sediment, stubborn dirt, fallen leaves and floating debris. Fully cordless and hose-free, it requires no external power or complex installation. With smart cruise navigation and obstacle avoidance, it delivers full-coverage dead-zone-free cleaning. IPX8 waterproof construction ensures safe underwater operation, providing efficient, hands-free pool maintenance for various residential and commercial pools.
Inquire