This bar serves to notify visitors of important updates

Contact-us


Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools

Compact Cordless Pool Robot for Above Ground Pools

  • This 3‑in‑1 cordless robotic pool cleaner delivers complete pool coverage: vacuum the floor, climb vertical walls and scrub the troublesome waterline where oils, scum and algae build up most.
  • High‑traction track system ensures stable wall‑climbing performance on tile, concrete, pebble‑tec and fiberglass pool surfaces.
  • Dual active scrub brushes work together to dislodge stubborn grime, while consistent suction sucks away leaves, sand and fine particles.
  • Equipped with smart gyro navigation for automatic full‑pool cleaning.
  • Large filter basket holds plenty of debris for reduced frequent emptying.
  • Floating handle makes lifting robot out of water effortless. Simple post‑use rinse keeps suction and wall‑climbing performance at peak.
Inquire
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools
Compact Cordless Pool Robot for Above Ground Pools

Brand

Addotron

Model No.

Hydro Apex Plus

Control

Remote control / App

Efficiency

12 m/min

Characteristics

  1. Cleaning Function: 3‑in‑1: Floor / Wall / Waterline

  2. Power Source: Cordless Rechargeable Battery

  3. Control Mode: Auto‑clean + Remote Manual Steering

  4. Pool Type: Deep in‑ground pools

  5. Surface Compatibility: Tile, Concrete, Pebble‑tec, Fiberglass, Vinyl Liner

  6. Not Suitable: Infinity / Zero‑edge pools

User Guide

  1. Fully charge the unit on land first.

  2. Pair the remote control.

  3. Gently lower robot into deep in‑ground pool, let it sink to release trapped air.

  4. Choose auto full‑pool cleaning, or use remote to manually steer to dirty corners & walls.

  5. It climbs vertical walls and scrubs waterline scum automatically.

  6. When cycle finishes, lift robot out via floating handle, empty and rinse filter basket.

  7. No cables, no complicated setup, get spot‑less deep pool effortlessly.

Important Notes

⚠️ Do NOT dry‑run the robot

⚠️ Charge only on dry land

⚠️ Remove robot before swimming

⚠️ Clean filter after every use

Basic Specifications

Color

Greyish black / Black

Size

L526 x W450 x H260 mm

Weight

13.8 kg

Navigation

Navigation system

IMU + Ultrasound

Remote control

433 remote control, water depth 1.5m, controllable range 15m

Sensor

Gyroscope

6 axes

Ultrasonic testing

6 meters

Motor

Water-absorbing motor

Brushless motor, rotational speed: 3000 rpm

Walking motor

DC deceleration motor, rotational speed: 20 - 25/min

Battery

Battery power

9000 mAh

Working hours

3 h

Charging time

3.5 h

Storage

Temperature range

-20℃ ~ 60℃

Product lifespan

2 Y

Working temperature

4℃ ~ 35℃

1.

3‑in‑1 Full‑Pool Coverage: Floor, Wall & Waterline

One robot takes care of pool floor, vertical walls and grimy waterline. Dual rotating scrub brushes scrape off algae, limescale and oily residue. No need for manual wall brushing, delivers all‑round cleaning instead of only cleaning pool bottom.

2.

100% Cordless, No Cables or Hoses

Fully battery‑driven design, free from tangled power cords and hose restrictions. Easy to deploy and retrieve, moves freely in deep‑end zones and steep slopes without cable‑entanglement trouble.

3.

Dual‑Mode Control: Auto‑Clean + Remote Manual Steering

Built‑in gyro smart navigation for systematic automatic full‑pool cleaning. Switch to remote manual mode to steer robot to heavily‑soiled corners, walls and waterline trouble spots, flexible for special‑shaped pools.

4.

Reliable Wall‑Climbing & Powerful Suction Performance

Upgraded high‑grip track system ensures stable vertical wall climbing. Strong suction picks up leaves, twigs, sand and fine silt. Works well on tile, concrete, pebble‑tec, fiberglass and vinyl liner pool surfaces.

5.

User‑Friendly Operation & Low‑Effort Maintenance

Floating lifting handle for convenient lifting out of water. Quick‑open filter compartment for fast debris emptying and rinsing. No complicated installation, just charge on land and drop into pool to start cleaning.

Applicable Environment and Precautions

1.

Pool Type:

Deep in‑ground pools; rectangular, oval, kidney‑shaped, free‑form irregular pools.

2.

Pool Surfaces

Tile, concrete, pebble‑tec, fiberglass, vinyl liner.

3.

Water Depth

0.5‑3.0 m (1.6‑9.8 ft). Minimum 0.5 m depth is required for normal wall‑climbing function.

4.

Water Temperature

5‑35°C (41‑95°F). Low water temperature will reduce battery runtime and wall‑climbing performance.

5.

Water Chemistry

pH 7.0‑7.8; Max chlorine 4 PPM; Max salt 5000 PPM for salt‑water pools.

Application Scenario

3

Small Swimming Pool

3

Indoor Public Swimming Pool

3

Outdoor Large Swimming Pool

不规则泳池

Non-standard Swimming Pool

1.

Can I use this robot in salt‑water pools?

Yes, it supports salt‑water pools up to 5000 PPM salt concentration. Rinse robot with fresh water after each use to extend service life.

2.

Why wall‑climbing becomes weak in cold water?

Low water temperature will affect battery output and rubber track friction. For best climbing effect, use within 22‑32°C water temperature range.

3.

What kinds of pools can this cleaner work in?

It is designed for residential deep in‑ground pools. Fits rectangular, oval, kidney‑shaped and free‑form pools. Compatible with tile, concrete, pebble‑tec, fiberglass and vinyl liner surfaces. Water depth requirement: 0.5‑3.0m for normal wall‑climbing.

❌ Not suitable: infinity / zero‑edge pools, above‑ground pools without solid vertical walls, commercial public pools.

4.

What are the water environment requirements?

Water temperature: 5‑35°C. Water pH:7.0‑7.8. Max chlorine:4 PPM. Max salt:5000 PPM for salt‑water pools.

⚠️ Do NOT run during shock‑chlorination. Strong chemicals will damage internal seals.

5.

Why can’t the robot climb walls sometimes?

  • Low battery power

  • Water temperature too low

  • Pool wall covered with thick grease or algae

  • Loose tiles or sharp bumps on wall surface

    Fully charge the robot and keep pool wall in good condition for best climbing result.

6.

The remote control does not respond, what to do?

  • Confirm robot is powered on.

  • Re‑pair remote control on land.

  • Check remote‑control battery.

  • Keep remote close to the robot during operation.

7.

Will it get stuck in pool corners?

Built‑in gyro smart navigation reduces stuck risks. If trapped, switch to remote manual mode to steer it away. Avoid pools with extremely narrow dead‑end gaps.

Related Products

This Cordless Wall Climbing Pool Robot is a fully wireless, all-in-one automatic pool cleaner. Equipped with upgraded wall-climbing traction technology, it steadily climbs vertical pool walls to wipe out stubborn waterline grime, algae and slimy stains ignored by ordinary cleaners. Adopting hose-free and cordless design, it requires no external pump or complicated setup for plug-and-play use. Built with intelligent cruise navigation and obstacle avoidance, it achieves full-coverage cleaning on pool floors, walls and waterlines without dead zones. IPX8 waterproof and rechargeable construction supports long-hour unattended underwater operation, delivering efficient hands-free maintenance for all residential and commercial pools.
Inquire
This Anti-dropping Cordless Wall Climbing Pool Robot is an upgraded smart pool cleaner optimized with anti-fall climbing technology. Adopting enhanced anti-slip traction structure, it stably climbs vertical pool walls without slipping or dropping, enabling safer waterline stain and algae cleaning. Fully cordless and hose-free, it eliminates messy cables and complicated installation for true plug-and-play use. Equipped with intelligent full-coverage navigation and precise obstacle avoidance, it thoroughly cleans pool floors, walls and waterlines with zero dead zones. IPX8 full waterproof and rechargeable design supports long-duration unattended underwater cleaning, delivering safer, more reliable pool maintenance for all residential and commercial pools.
Inquire
This Automatic Wall-climbing Pool Cleaner is a multi-functional underwater pool sweeper for full 3D pool cleaning. Designed with upgraded wall-climbing traction technology, it steadily climbs vertical pool walls and thoroughly cleans stubborn waterline grime, algae and residual stains. Working fully underwater, it delivers deep cleaning for pool floors, walls and corners without floating leakage. Cordless and hose-free with automatic cruising, it requires no manual operation or external equipment. Featuring smart obstacle avoidance and IPX8 full waterproof design, it provides efficient, hands-free underwater sweeping for all residential and commercial pools.
Inquire
This Long Battery Life Cordless Pool Robot is an upgraded wireless pool vacuum focused on durable runtime and powerful cleaning performance. Equipped with a high-capacity built-in battery, it supports ultra-long continuous cleaning for medium and large pools. Featuring enhanced strong suction technology, it effortlessly picks up fine sediment, stubborn dirt, fallen leaves and floating debris. Fully cordless and hose-free, it requires no external power or complex installation. With smart cruise navigation and obstacle avoidance, it delivers full-coverage dead-zone-free cleaning. IPX8 waterproof construction ensures safe underwater operation, providing efficient, hands-free pool maintenance for various residential and commercial pools.
Inquire