This bar serves to notify visitors of important updates

Contact-us


Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot

Battery Powered Waterline Scrubbing Pool Robot

  • This cordless robotic pool cleaner adopts advanced gyroscope floor mapping & smart floor navigation system, breaking away from random bump cleaning patterns.
  • Equipped with reliable wall climbing traction, the robot smoothly transitions from pool floor to vertical walls. It delivers comprehensive cleaning for tile, fiberglass pool surfaces.
  • 100% battery-powered cordless design eliminates tangled floating power cables. Multiple optional cleaning modes support floor-only cleaning, wall & waterline scrubbing, and full-pool all-surface maintenance.
  • Built-in high-flow suction works alongside scrubbing brushes to lift and capture various debris. Lightweight body with retrieval handle makes it easy to fish out of the pool using a telescopic pole.
  • Perfect for in-ground and above-ground residential swimming pools. Upgrade your pool maintenance with intelligent route planning and bid farewell to labor-intensive manual scrubbing.
Inquire
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot
Battery Powered Waterline Scrubbing Pool Robot

Brand

Addotron

Model No.

Hydro Apex S

Control

Remote control / App

Efficiency

12 m/min

Characteristics

  1. Gyroscope floor mapping achieves orderly planned navigation, fewer missed areas

  2. Stable wall climbing, perfectly compatible with tile walls and fiberglass walls

  3. Cordless battery design, no tangled power cables

  4. Multi-mode cleaning: floor / wall & waterline / full pool auto clean

  5. Combined scrubbing and suction to remove stains and various debris

  6. Easy-clean filter basket, simple daily maintenance

User Guide

  1. Fully charge the robot before initial use and seal charging waterproof cap tightly.

  2. Power on, the gyroscope sensor completes mapping initialization.

  3. Choose Floor Only / Wall & Waterline / Full Auto cleaning mode.

  4. Submerge the robot slowly and discharge trapped air. It cleans following planned intelligent routes.

  5. Capable of climbing tile and fiberglass vertical walls automatically.

  6. Use a telescopic pole to recover the robot once cleaning is completed.

  7. Empty and rinse filter basket, clean scrub brushes after every use.

  8. Air dry in shade; strictly avoid dry running out of water.

Important Notes

⚠️1. Do NOT run the robot out of water; dry running causes severe motor damage.

⚠️2. Only use the original charger and ensure the charging waterproof cap is tightly closed underwater.

⚠️3. No swimming while the pool robot is working.

⚠️4. Clear sharp hard debris in the pool before operation to protect brushes, tracks and pool surfaces.

⚠️5. Suitable for tile and fiberglass walls. Heavily slippery walls may lead to climbing failure.

⚠️6. Avoid manually moving the robot frequently during cleaning, which disturbs gyroscope mapping.

⚠️7. Clean filter basket and brushes after every use; air dry in shade.

⚠️8. Operating water temperature: 5℃–35℃. Not suitable for hot tubs, spas and untreated saltwater pools.

⚠️9. Charge the battery every 3 months during long-term storage.

Basic Specifications

Color

Greyish black / Black

Size

L526 x W450 x H260 mm

Weight

13.8 kg

Navigation

Navigation system

IMU + Ultrasound

Remote control

433 remote control, water depth 1.5m, controllable range 15m

Sensor

Gyroscope

6 axes

Ultrasonic testing

6 meters

Motor

Water-absorbing motor

Brushless motor, rotational speed: 3000 rpm

Walking motor

DC deceleration motor, rotational speed: 20 - 25/min

Battery

Battery power

9000 mAh

Working hours

3 h

Charging time

3.5 h

Storage

Temperature range

-20℃ ~ 60℃

Product lifespan

2 Y

Working temperature

4℃ ~ 35℃

1.

Gyroscope Floor Mapping & Smart Planned Navigation

Different from random collision-style cleaners, the built-in gyroscope completes pool floor mapping and generates systematic cleaning routes. Effectively reduces repeated cleaning and missed zones for higher cleaning efficiency.

2.

Stable Wall-Climbing for Tile & Fiberglass Surfaces

Optimized traction track system delivers reliable vertical climbing performance. Seamlessly transitions from pool floor to vertical walls, specially designed for tile and fiberglass pool surfaces to scrub algae, limescale and stubborn waterline stains.

3.

100% Cordless Battery-Powered Operation

No messy floating power cables underwater. Free from cable tangling and length restrictions. Simply drop the robot into the pool to start automatic cleaning with greater flexibility.

4.

Multiple Optional Cleaning Modes

Supports Floor Only Mode, Wall & Waterline Mode and Full Auto Mode. Choose targeted cleaning mode according to your pool maintenance demands.

5.

Integrated Scrubbing & Strong Suction + Easy Maintenance

Rotating scrub brushes loosen adhered dirt while high-flow suction collects leaves, sand, silt and fine debris. Quick-access detachable filter basket allows fast rinsing after each use. Equipped with retrieval handle for easy fishing out via telescopic pole.

Applicable Environment and Precautions

1.

⚠️

Not recommended for saltwater pools without special customization

2.

⚠️

Not for hot tubs, spas and hot spring pools

3.

⚠️

Avoid water with excessive high-concentration corrosive chemicals

4.

Optimized for tile and fiberglass pool walls; also works on smooth concrete

5.

Fits in-ground & above-ground residential swimming pools

6.

Applicable water depth: 0.6 m – 3.0 m

7.

Operating water temperature: 5℃ – 35℃

8.

Suitable for chlorine-treated regular swimming pool water

Application Scenario

3

Small Swimming Pool

3

Indoor Public Swimming Pool

3

Outdoor Large Swimming Pool

不规则泳池

Non-standard Swimming Pool

1.

Charging Requirements

Only use the original dedicated charger. Charge indoors in a dry environment. Do not charge outdoors in rain or high humidity. After charging, securely cover the charging port waterproof cap to prevent water infiltration.

2.

Strictly Prohibit Dry Running

The robot must work underwater. Never start the robot on land. Dry operation will burn out motors and damage waterproof seals, leading to permanent failure.

3.

Safety Warning

No swimmers are allowed in the pool while the robot is operating. Keep children away from the working robot.

4.

Before Cleaning

Remove large branches, sharp stones, broken glass and metal scraps from the pool. Sharp objects may scratch fiberglass/tile pool surfaces and cut tracks or scrub brushes.

5.

Wall Climbing Reminder

This robot is designed for tile and fiberglass pool walls. If the wall surface is covered with thick oil, algae or slippery biofilm, please clean the wall surface first; otherwise unstable climbing or slipping may occur. Pools with overhanging ledges are not suitable for wall climbing.

6.

Post-Use Care

After each use, take out and rinse the filter basket, clean scrub brushes and traction tracks. Air-dry completely in a cool, ventilated shaded area. Do not expose to direct sunlight for a long time, which will accelerate aging of rubber parts.

7.

Battery Storage

If the robot will not be used for a long time, fully charge the battery first. Recharge once every 3 months to protect battery lifespan. Do not store the robot in a frozen environment.

8.

Working Environment Limit

Applicable water temperature: 5℃ ~ 35℃. Do not use in hot springs, spas, saltwater pools unless specially customized.

9.

Malfunction Handling

If abnormal vibration, strange noise or failure to climb walls occurs, stop operation immediately. Take the robot out of water and check for stuck debris. Do not disassemble the robot privately.

Related Products

This upgraded Auto-return Cordless Pool Robot is a fully battery-operated automatic pool vacuum. Featuring an innovative auto-return function, the robot automatically navigates back to the pool edge once the cleaning cycle is completed or the battery is low, enabling effortless one-hand retrieval. Built with intelligent anti-stuck navigation technology. Equipped with powerful rotating scrub brushes and strong suction. 100% cordless and hose-free design eliminates tangled cables, dragging hazards and reliance on external pumps or power sources. The ultra-lightweight body ensures easy handling and space-saving storage. The quick-release large-capacity filter basket captures both large and fine particles, low daily maintenance. Compatible with most residential freshwater in-ground and above-ground pools with tile, concrete, fiberglass and vinyl liner surfaces.
Inquire
This lightweight cordless robotic pool cleaner brings effortless pool maintenance to residential users. Thanks to compact, lightweight body design, it can be easily lifted out from pool water with one hand, avoiding heavy‑weight burdens of traditional pool robots. Fully cordless and battery‑powered, no tangled power cables, no external hoses or pumps required. Just charge it up, drop it into the pool and press one button to start automatic cleaning. Built‑in smart navigation reduces stuck risks and achieves full‑pool coverage. Fit for most in‑ground and above‑ground residential freshwater pools. Works well on tile, concrete, fiberglass and vinyl liner surfaces.
Inquire
Cordless robotic pool cleaner built for thorough deep waterline cleaning. Powerful scrubbing brushes strip off dirt, body‑oil film, algae and scale buildup along the hard‑to‑reach waterline. Smart navigation system avoids stuck situations, covers the whole pool without manual steering. Large‑capacity filter basket traps fine debris, leaves and dust. Rechargeable battery delivers long runtime for complete pool cleaning. Works for in‑ground and above‑ground pools, efficiently tackling tough waterline grime with zero cable hassle.
Inquire
This cordless pool robot features simple one‑touch start operation. No complicated setup, no tangled cords. Drop it into your in‑ground pool, and it autonomously cleans floor, climbs walls and scrubs grimy waterline. Built‑in smart navigation for full‑pool coverage. When cleaning finishes or battery runs low, it automatically parks by the pool wall for easy retrieval. Spend less time on pool chores and more time enjoying your crystal‑clear pool.
Inquire